SMS-D3-20 पूर्ण स्वचालित पेंच बनाउने मेसिन

पेंच बनाउने मेसिन

उत्पाद विवरण

Screws are part of a family of threaded fasteners that includes bolts and studs as well as specialized screws like carpenter's wood screws and the automotive cap screw. The threads (or grooves) can run right handed or left, tapered, straight, or parallel. There are two types of screws, machine and wood screws. Both are made of metal, however the machine screw has a constant diameter and joins with nuts while the wood screw is tapered and grips to the actual wood surface.

We are offering high performance screw making machine. Our screw making machine is designed and manufactured, to compete with the international market. These header machines are widely known for its durability and quality. These header machines are available at industrial leading price.

These cold heading machines are fully automatic and easy to operate with little training, fitted with Solid Die to produce blank for Bolts, Screws, Rivets and other similar components. Cut off and knock out mechanism have safety devices that will stop any major accident if any abnormal function occurs in machines.

The Screw Manufacturing Process

Machining is only used on unique designs or with screws too small to be made any other way. The machining process is exact, but too time consuming, wasteful, and expensive. The bulk of all screws are mass manufactured using the thread rolling method, and that is the procedure described in further detail.

Cold heading

1 Wire is fed from a mechanical coil through a prestraightening machine. The straightened wire flows directly into a machine that automatically cuts the wire at a designated length and die cuts the head of the screw blank into a preprogrammed shape. The heading machine utilizes either an open or closed die that either requires one punch or two punches to create the screw head. The closed (or solid) die creates a more accurate screw blank. On average, the cold heading machine produces 100 to 550 screw blanks per minute.

Thread rolling

2 Once cold headed, the screw blanks are automatically fed to the thread-cutting dies from a vibrating hopper. The hopper guides the screw blanks down a chute to the dies, while making sure they are in the correct feed position.

3 The blank is then cut using one of three techniques. In the reciprocating die, two flat dies are used to cut the screw thread. One die is stationary, while the other moves in a reciprocating manner, and the screw blank is rolled between the two. When a centerless cylindrical die is used, the screw blank is rolled between two to three round dies in order to create the finished thread. The final method of thread rolling is the planetary rotary die process. It holds the screw blank stationary, while several die-cutting machines roll around the blank.

Learn more about high speed screw thread rolling machine.

Threads can be cut into the blank by several methods. In the reciprocal method, the screw blank is rolled between two dies. In the cylindrical method, it is turned in the center of several rollers.

Threads can be cut into the blank by several methods. In the reciprocal method, the screw blank is rolled between two dies. In the cylindrical method, it is turned in the center of several rollers.

All three methods create higher quality screws than the machine-cut variety. This is because the thread is not literally cut into the blank during the thread-rolling process, rather it is impressed into the blank. Thus, no metal material is lost, and weakness in the metal is avoided. The threads are also more precisely positioned. The more productive of the thread-rolling techniques is by far the planetary rotary die, which creates screws at a speed of 60 to 2,000 parts per minute.

 

भिडियो हेर्नुहोस्

SMS-D3-20 पूर्ण स्वचालित पेंच बनाउने मेसिन

मोडेलएकाइSMS-D3-20
व्यासमिमीΦ4.0
अधिकतम ब्ल्यांक लम्बाईमिमी20
Max.Cut-off Lengthमिमी47
Strokeमिमी40
क्षमताpcs./min160-190
मुख्य डाईको आकारमिमीΦ20*36
पहिलो र दोस्रो पंचको आकारमिमीΦ18*50*2
कट अफ डाई आकारमिमीΦ13*25
Cutter Sizeमिमी6*25*42
Mail Motor Powerकिलोवाट1.1
Oil Pumpw180(1/4HP)
मेशिनको बाहिरी आकार (L * W * H)मिमी1500*850*1100
नेट वजनके। जि650
भिडियो हेर्नुहोस्

SMS-D4-40 स्क्रू निर्माण मेशीन बिक्रीको लागि

मोडेलएकाइSMS-D4-40
व्यासमिमीΦ5.0
अधिकतम ब्ल्यांक लम्बाईमिमी40
Max.Cut-off Lengthमिमी48
Strokeमिमी68
क्षमताpcs./min150-180
मुख्य डाईको आकारमिमीΦ30*60
पहिलो र दोस्रो पंचको आकारमिमीΦ25*65*2
कट अफ डाई आकारमिमीΦ15*30
Cutter Sizeमिमी10*35*72
Mail Motor Powerकिलोवाट2.2
Oil Pumpw180(1/4HP)
मेशिनको बाहिरी आकार (L * W * H)मिमी1800*850*1150
नेट वजनके। जि1200

विशेषताहरु:

१. सटीक र स्थिर संरचनाले लचिलोपनका साथ सटीक / मिनी रिभेटहरू गर्न सक्दछ।

२. चीनले पेटेन्टेड युनाइटेड गठित पंच लिफ्टि plan प्लेट्क्सले लिफ्टि stability प्रणालीको स्थिरता सुनिश्चित गर्न असेंब्लीमा संचयी विचलन कम गर्न सक्छ।

Flex. लचिलो उठाने प्रणाली मेशिनको दक्षता सुनिश्चित गर्दछ।

Sl. स्लाइड साइड गाइडले पंच होल्डरको स्विing्ग कम गर्न सक्छ।

Hard. हार्ड र स्थिर फाउन्डेशनले मेशिनको कठोरता र हेडि ofको स्थिरतामा सुधार ल्याउँछ

भिडियो हेर्नुहोस्

SMS-D5-65 वुड पेंच बनाउने मेसिन

मोडेलएकाइSMS-D5-65
व्यासमिमीΦ7.0
अधिकतम ब्ल्यांक लम्बाईमिमी65
Max.Cut-off Lengthमिमी80
Strokeमिमी92
क्षमताpcs./min120-140
मुख्य डाईको आकारमिमीΦ34.5*80
पहिलो र दोस्रो पंचको आकारमिमीΦ31*75*2
कट अफ डाई आकारमिमीΦ19*35
Cutter Sizeमिमी10*35*72
Mail Motor Powerकिलोवाट3
Oil Pumpw180(1/4HP)
मेशिनको बाहिरी आकार (L * W * H)मिमी2300*1080*1250
नेट वजनके। जि1800
भिडियो हेर्नुहोस्

SMS-D5-80 स्वचालित पेंच बनाउने मेसिन

मोडेलएकाइSMS-D5-80
व्यासमिमीΦ7.0
अधिकतम ब्ल्यांक लम्बाईमिमी80
Max.Cut-off Lengthमिमी90
Strokeमिमी110
क्षमताpcs./min100-140
मुख्य डाईको आकारमिमीΦΦ..5 * १००
पहिलो र दोस्रो पंचको आकारमिमीΦ31*75*2
कट अफ डाई आकारमिमीΦ19*35
Cutter Sizeमिमी10*35*72
Mail Motor Powerकिलोवाट3
Oil Pumpw180(1/4HP)
मेशिनको बाहिरी आकार (L * W * H)मिमी2400*1080*1250
नेट वजनके। जि1850
भिडियो हेर्नुहोस्

SMS-D5-100 Drywall पेंच बनाउने मेसिन

मोडेलएकाइSMS-D5-100
व्यासमिमीΦ3.0-7.0
अधिकतम ब्ल्यांक लम्बाईमिमी100
Max.Cut-off Lengthमिमी120
Strokeमिमी130
क्षमताpcs./min80-100
मुख्य डाईको आकारमिमीΦ35*120
पहिलो र दोस्रो पंचको आकारमिमीΦ30*80*2
कट अफ डाई आकारमिमीΦ20 * 35
Cutter Sizeमिमी10*35*72
Mail Motor Powerकिलोवाट3
Oil Pumpw180(1/4HP)
मेशिनको बाहिरी आकार (L * W * H)मिमी2500*1150*1350
नेट वजनके। जि2210
भिडियो हेर्नुहोस्

SMS-D5-150 इस्पात पेंच बनाउने मेसिन

मोडेलएकाइSMS-D5-150
व्यासमिमीΦ3.0-7.0
अधिकतम ब्ल्यांक लम्बाईमिमी150
Max.Cut-off Lengthमिमी168
Strokeमिमी190
क्षमताpcs./min80-100
मुख्य डाईको आकारमिमीΦ40*180
पहिलो र दोस्रो पंचको आकारमिमीΦ35*100*2
कट अफ डाई आकारमिमीΦ20 * 35
Cutter Sizeमिमी10*35*72
Mail Motor Powerकिलोवाट3
Oil Pumpw180(1/4HP)
मेशिनको बाहिरी आकार (L * W * H)मिमी2600*1150*1350
नेट वजनके। जि2990

Machine needed to make screws

प्रक्रिया र मेशिनहरूको संक्षिप्त परिचय आवश्यक:

(1). Pull the coarse line to the line patch needed. (Wire drawing machine)

(2). Adjust, produce, and form the head of screw on the heading machine. (Screw heading machine)

())। कुण्डल धागो रोलि machine मेसिनमा दाँत लिनुहोस्, र स्क्रू पूर्ण रूपमा बनाउनुहोस् (थ्रेड रोलि machine मेशीन)

(4). Treat the semi-finished screw in the heat treatment according to the standard (Heat treatment furnace)

(5). According to the requirements, process plating etc. (Zinc plating machine)

(6). Packing and out of factory

Why do we choose Somose screw making machines?

We are professional manufacturer of various kinds of screw, nail, rivets making machines, Which has over 18 years experience for producing screw production line. Not only have rich experience to produce high quality machine , but also with strong technical team as basis.